Tweet
Replaced 97 EZgo motor with 2003-08 MCI 350 motor. Need to know part numbers for the harness that goes in between the pulsar coil and the ignitor. Not much info out there on MCI's that I can find. Hope some of you out there have the answer.....
-
-
the harness from ignitor to pulsar and ignition coil, also contains the DF wire part #
70899G01. Take a look at this link: http://bennettgolfcars.ca/manuals.php?tid=3 many parts manuals here and you can download them and look up to double check what i found. -
Thanks wthompson for the imformation those manuals were more informative than the ones I had been looking at. I'm waiting on some parts from a retro kit but I may need that cable. thanks againComment
Comment