1st build have wiring questions

[bailey264]

I have 2 gauge battery cables,controller cables. Now i am wondering what gauge wire should I replace all of the other tiny subpart wiring with 14 gauge.Any suggestions would be greatly appreciated. Will post pics soon since I have lifted it tires,steering column,steering wheel,dash,stereo, too much to list thanks,Kenny.

[andy4639]

Just upgrade with new wire that doesn't have any breaks in it of same guage. It will be fine it doesn't carry the load of the drive system.

[Terry Lacy]

How can I get a 2011 wiring diagram?

[gaminde]

If you have a home depot in your area they have a low voltage wire in numinous colors in #16 that should work perfect. it sells in 24 ft packs.

[bailey264]

Thank you guys I have everything at my disposal a very large area my new problem is that the previous owner has the wires spliced into least once or twice

[bailey264]

I was also told to run 6 gauge to my forward and reverse switch does that sound correct

[gaminde]

What type of cart IQ or series ?
IQ only has a toggle switch and #16 is fine
if its a series cart with a big mechanical switch then the same size as battery cables

[bailey264]

No just a little toggle switch thankyou guys are a great help

[andy4639]

See if this helps.

http://www.alltraxinc.com/files/DOC1...Q-WIRE-DIA.pdf

[bailey264]

Should I worry about all the splices.I put new ends on them and heat taped them Once again thanks soooooo much for the help

[bailey264]

Does anyone know where to find any of the square controller pins for club car no luck with dealer or radio shack

[gaminde]

Does anyone know where to find any of the square controller pins for club car no luck with dealer or radio shack

Guess I could add this to my parts list
Jameco 44476-3112