Anyone have any experience with or opinions about installing a G22 357cc motor in a G14?
Forum Announcement
Collapse
No announcement yet.
Engine Swap
Collapse
X
-
-
Plowmans Carts are pretty reputable for motor conversions and maybe you should give them a call, Don at 810-736-1100.
Depending on what you're looking for, here's one that is a little pricey too but has 28HP and will go 45mph with stock gearing. http://www.plowmanscarts.com/hp_v-twin.htmlComment
-
I just got through talking to the mechanic at my dealer about the 357cc engine swap. He has already done them, using new engine units. The only notable mod that needs to be done is to swap the locations of the battery and fuel tank.
I'll be scheduling mine to be done sometime after the first of the year.Comment
-
Posted earlier by Stoney View PostI just got through talking to the mechanic at my dealer about the 357cc engine swap. He has already done them, using new engine units. The only notable mod that needs to be done is to swap the locations of the battery and fuel tank.
I'll be scheduling mine to be done sometime after the first of the year.RegardsComment
-
I spoke with the dealer mechanic today about the 357cc conversion in older carts. He said it can be done on all G2 thru G16 gas models with the G16 being the easiest model to do.
Unfortunately, after pricing out all the parts(new) and adding labor and tax, it was right at $3K+. Looks like I will pass on the conversion unless my 300cc takes a dump.Comment
-
Posted earlier by Stoney View PostI spoke with the dealer mechanic today about the 357cc conversion in older carts. He said it can be done on all G2 thru G16 gas models with the G16 being the easiest model to do.
Unfortunately, after pricing out all the parts(new) and adding labor and tax, it was right at $3K+. Looks like I will pass on the conversion unless my 300cc takes a dump.RegardsComment
Recent posts in current forum
Collapse
Unconfigured Ad Widget
Collapse
Unconfigured Ad Widget
Collapse
Comment