Tweet
Where do you check the MCOR output at? Also, it should increase voltage as you accelarate?
-
-
depends on the cart the year some carts are 0 to 5k some are 5 to 0kPosted earlier by HGC2010 View Post
you can check at controller voltage may go up or down you will be looking for skips or no voltage -
club car iq mcor's do not go fully to "o" ohms.....usually stops around 1.4k ohms..i believe this can be checked directly on the speed controller.
pins 1 -2-3
(unplug 16 pin plug from speed controller first )Comment
Comment