Forum Announcement

Collapse
No announcement yet.

EZGO stopped working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EZGO stopped working

    My cart was running fine. I stopped it and when i tried to use it again, it would not move in either direction. Batteries show 38 volts. The solenoid does make a clicking sound when activated by the accelerator pedal. I get 38 volts coming into the solenoid and 37.4 on the controller side. When the wires are removed from the large bolts on the solenoid, there is no longer a click and i get OL reading for resistance. The small bolts/ wires on the solenoid give 2.7 volts when activated. I removed all wires from the motor and checked continuity.

    i get OL for. A1-A2, A1-F1, A1-F2, A2-F1, A2-F2. When I check F1-F2 i get 1.0 as a reading.

    Any help to determine where my problem is will be greatly appreciated.

Please log in or Sign Up to reply to this thread

Golf Carts Forum

Collapse

Unconfigured Ad Widget

Collapse

Unconfigured Ad Widget

Collapse
Loading
X