Forum Announcement

Collapse
No announcement yet.

2008 48v Rxv rear lift

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2008 48v Rxv rear lift

    If anyone else has had an issue with the rear end bottoming out when loading up the cargo bed and you have a welder, there's an easy rear lift. Just finished approx. 4" lift with no extra parts as long you have access to a welder. Cut the driver side and passenger axle spring mount off and re-weld to the opposite side on top of the axle. You still use original u-bolts but on opposite sides as well. Make a small extension bracket for the shock and your done. Took approximately 3 hours. Now you can load it up or have People on the seat and no bottoming out. Just took it for a drive and it's a dream compared to factory! Photo soon......

    You do not have permission to view this gallery.

    If you are a guest, you may be required to Log In or Sign Up to view.

    This gallery has 1 photos.


  • #2
    Welcome to Golf Carts Forum,

    Thanks for sharing, looks great so far. Do you have a photo of it loaded?
    Regards

    Comment


    • #3
      Also while tinkering I gave it a quick lift in the front by moving the top shock mount down to the next factory hole. A little over an inch lift. More pics soon, loaded as well. Cheers

      Comment

      Please log in or Sign Up to reply to this thread

      Unconfigured Ad Widget

      Collapse

      Unconfigured Ad Widget

      Collapse
      Loading
      X